| Description Recently Viewed
A new replacement charger for Viewsonic FS1501 LCD models, with power cord included. This Viewsonic charger (12v, 5a, 60W) is interchangeable with any Viewsonic charger requiring 60W or less, as long as the voltage matches. The charger can be used worldwide, so take it with you anywhere you go.
Internal safety features against electrical hazards.Power surge protection.Durable case sealed for protection against moisture.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your LCD.
| Viewsonic FS1501 |
| Top AC Adapter |
| AC 100-240V, 50/60Hz |
| 12v, 5a |
| 60 Watts |
| Single Male Pin |
| 5.5mm/2.5mm diameter |
| 11.2 mm |
| 0.52 lbs |
| 3.29 in x 1.07 in x 0.89 in |
| 7.56 ft |
| Black |
| |
|
 |
