| Description Recently Viewed
A new replacement charger for HP Pavilion dm3-1115eg, dm3-1115tx laptop models, with power cord included in the package. This HP Pavilion charger (18.5v, 3.5a, 65W) works the same as any HP charger requiring 65W or less, as long as the voltage matches. The charger can be used globally, so take it with you anywhere you go.
Over-voltage and over-current protection.Short-circuit protection.Durable case sealed for protection against moisture.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
| HP Pavilion dm3-1115eg, dm3-1115tx |
| Top AC Adapter |
| AC 100-240V, 50/60Hz |
| 18.5v, 3.5a |
| 65 Watts |
| Single Male Pin |
| 4.8mm/1.7mm diameter |
| 11.0 mm |
| 0.64 lbs |
| 4.13 in x 1.73 in x 1.08 in |
| 8.41 ft |
| Black |
| |
|
 |
