| Description Recently Viewed A new replacement charger for HP 2533t, 4320t, 4410t Mobile Thin Client laptop models, with power cable included in the package. This HP Mobile Thin Client charger (18.5v, 3.5a, 65W) works the same as any HP charger requiring 65W or less, as long as the voltage matches. The charger can be used worldwide, so take it with you when you travel internationally.
Over-voltage and over-current protection.Power surge protection.Durable case sealed for protection against moisture.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
HP 2533t, 4320t, 4410t Mobile Thin Client |
Top AC Adapter |
AC 100-240V, 50/60Hz |
18.5v, 3.5a |
65 Watts |
Single Pin |
7.4mm/5.0mm diameter |
11.3 mm |
0.63 lbs |
4.25 in x 1.66 in x 1.17 in |
7.81 ft |
Black |
| |
|
 |