| Description Recently Viewed
A new replacement charger for Gateway 20v 3.5a, 70 Watt AC Adapter, with power cable included. This Gateway charger (20v, 3.5a, 70W) is compatible with any Gateway charger requiring 70W or less, as long as the voltage matches. The charger can be used worldwide, so take it with you anywhere you go.
| Gateway Colorbook | Gateway ColorBook 2 | Gateway Colorbook 486 |
| Gateway Colorbook 486DX/33 | Gateway Colorbook 486DX2/50 | Gateway ColorBook 486SX/25 |
| ADAPCB2 | SC10P |
Over-voltage and over-current protection.Short-circuit protection.Durable case sealed for protection against moisture.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
| Gateway 20v 3.5a, 70 Watt AC Adapter |
| Top AC Adapter |
| AC 100-240V, 50/60Hz |
| 20v, 3.5a |
| 70 Watts |
| 3 Pin |
| 11.0 mm |
| 0.76 lbs |
| 4.82 in x 1.79 in x 1.06 in |
| 7.3 ft |
| Black |
| |
|
 |
