| Description Recently Viewed
A new replacement charger for Fujitsu FPCAC28, FPCAC28AP laptop models, with power cable included. This Fujitsu charger (16v, 2.5a, 40W) is interchangeable with any Fujitsu charger requiring 40W or less, as long as the voltage matches. The charger can be used worldwide, so take it with you when you travel internationally.
Internal safety features against electrical hazards.Power surge protection.Durable case sealed for protection against moisture.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
| Fujitsu FPCAC28, FPCAC28AP |
| Top AC Adapter |
| AC 100-240V, 50/60Hz |
| 16v, 2.5a |
| 40 Watts |
| Single Male Pin |
| 6.0mm/4.4mm diameter |
| 10.7 mm |
| 0.55 lbs |
| 4.47 in x 1.86 in x 1.5 in |
| 7.42 ft |
| Black |
| |
|
 |
