| Description Recently Viewed
A new replacement charger for Fujitsu 19v 6.3a, 120 Watt AC Adapter, with power cord included in the package. This Fujitsu charger (19v, 6.3a, 120W) can replace any Fujitsu charger requiring 120W or less, as long as the voltage matches. The charger can be used worldwide, so take it with you anywhere you go.
| Fujitsu LifeBook 2800 | Fujitsu LifeBook 8200 | Fujitsu LifeBook 8600 |
| Fujitsu LifeBook C2230 | Fujitsu LifeBook C2240 | Fujitsu LifeBook N04 |
| Fujitsu LifeBook N3000 | Fujitsu LifeBook N3010 | Fujitsu LifeBook N3013 |
| Fujitsu LifeBook N5000 | Fujitsu LifeBook N5010 | Fujitsu LifeBook N53 |
| Fujitsu LifeBook N58 | Fujitsu LifeBook N61 | Fujitsu LifeBook NH751 |
| 32014700 | ACA-2100 | FMV-AC316 |
| FPCAC36 | FPCAC36AP | FPCAC39 |
| FPCAC39AP |
Over-voltage and over-current protection.Power surge protection.Rugged case withstands harshest mobile environments.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
| Fujitsu 19v 6.3a, 120 Watt AC Adapter |
| Top AC Adapter |
| AC 100-240V, 50/60Hz |
| 19v, 6.3a |
| 120 Watts |
| Hollow Cylinder Shape |
| 5.5mm/2.5mm diameter |
| 10.7 mm |
| 1.61 lbs |
| 6.27 in x 2.52 in x 1.53 in |
| 7.8 ft |
| Black |
| |
|
 |
