A new replacement charger for Epson 19v 3.16a, 60 Watt AC Adapter, with power cord included. This Epson charger (19v, 3.16a, 60W) can replace any Epson charger requiring 60W or less, as long as the voltage matches. The charger can be used worldwide, so take it with you anywhere you go.
Over-voltage and over-current protection.Short-circuit protection.Rugged case withstands harshest mobile environments.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
| Epson ActionNote 800
|| Epson ActionNote 866C
|| Epson ActionNote 880C |
| Epson ActionNote 880CX
|| Epson ActionNote 890C
|| Epson ActionNote 895C |
| Epson ActionNote 895CX
|| Epson ActionNote 910C |
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
|Epson 19v 3.16a, 60 Watt AC Adapter
|Top AC Adapter
|AC 100-240V, 50/60Hz
|4.18 in x 1.84 in x 1.01 in