A new replacement charger for EPS 19v 4.74a, 90 Watt AC Adapter, with power cable included in the package. This EPS charger (19v, 4.74a, 90W) works the same as any EPS charger requiring 90W or less, as long as the voltage matches. The charger can be used worldwide, so take it with you when you travel to another country.
Over-voltage and over-current protection.Power surge protection.Rugged case withstands harshest mobile environments.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
| EPS Technologies / Chicony MP968A
|| EPS Technologies Apex XC-200 / Chicony MP975A |
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
|EPS 19v 4.74a, 90 Watt AC Adapter
|Top AC Adapter
|AC 100-240V, 50/60Hz
|Single Male Pin
|4.97 in x 2.17 in x 0.99 in