| Description Recently Viewed
A new replacement charger for eMachines 19v 6.3a, 120 Watt AC Adapter, with power cable included. This eMachines charger (19v, 6.3a, 120W) functions the same as any eMachines charger requiring 120W or less, as long as the voltage matches. The charger can be used globally, so take it with you when you travel internationally.
| eMachines M2350 | eMachines M2352 | eMachines M2356 |
| eMachines M6805 | eMachines M6807 | eMachines M6809 |
| eMachines M6810 | eMachines M6811 | 83-110101-4200 |
| 83-110120-0000 | ADP-120SB | ADP-120SB A |
| AK.120AP.025 | PA-1121-03 | PA-1121-08 |
|
Internal safety features against electrical hazards.Short-circuit protection.Rugged case withstands harshest mobile environments.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
| eMachines 19v 6.3a, 120 Watt AC Adapter |
| Top AC Adapter |
| AC 100-240V, 50/60Hz |
| 19v, 6.3a |
| 120 Watts |
| Barrel Style |
| 5.5mm/2.5mm diameter |
| 11.4 mm |
| 1.4 lbs |
| 6.52 in x 2.4 in x 1.36 in |
| 7.68 ft |
| Black |
| |
|
 |
