| Description Recently Viewed
A new replacement charger for eMachines 19v 3.42a, 65 Watt AC Adapter, with power cable included in the package. This eMachines charger (19v, 3.42a, 65W) is interchangeable with any eMachines charger requiring 65W or less, as long as the voltage matches. The charger can be used worldwide, so take it with you when you travel internationally.
| eMachines MX4624 | eMachines MX4625 | eMachines N-10 |
| eMachines N-12 | eMachines N-14 | eMachines W4605 |
| eMachines W4620 | eMachines W4630 |
Internal safety features against electrical hazards.Power surge protection.Durable case sealed for protection against moisture.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
| eMachines 19v 3.42a, 65 Watt AC Adapter |
| Top AC Adapter |
| AC 100-240V, 50/60Hz |
| 19v, 3.42a |
| 65 Watts |
| Hollow Cylinder Shape |
| 5.5mm/2.5mm diameter |
| 10.8 mm |
| 0.59 lbs |
| 4.18 in x 1.89 in x 0.88 in |
| 8.07 ft |
| Black |
| |
|
 |
