| Description Recently Viewed
A new replacement charger for eMachines 18.5v 4.9a, 90 Watt AC Adapter, with power cord included. This eMachines charger (18.5v, 4.9a, 90W) works the same as any eMachines charger requiring 90W or less, as long as the voltage matches. The charger can be used worldwide, so take it with you anywhere you go.
| eMachines 2746 | eMachines M2105 | eMachines M5105 |
| eMachines M5116 | eMachines M5124 | eMachines M5124-G1 |
| eMachines M5305 | eMachines M5305-AC01 | eMachines M5309 |
| eMachines M5310 | eMachines M5312 | eMachines M5313 |
| eMachines M5405 | eMachines M5410 | eMachines M5412-G1 |
| eMachines M5414 | eMachines M6410 | eMachines M6412 |
| 0220A1890 | 83-110106-1000 | LSE0202C1890 |
|
Over-voltage and over-current protection.Power surge protection.Durable case sealed for protection against moisture.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
| eMachines 18.5v 4.9a, 90 Watt AC Adapter |
| Top AC Adapter |
| AC 100-240V, 50/60Hz |
| 18.5v, 4.9a |
| 90 Watts |
| Hollow Cylinder Shape |
| 4.8mm/1.7mm diameter |
| 11.4 mm |
| 0.84 lbs |
| 4.95 in x 2.13 in x 1.17 in |
| 7.62 ft |
| Black |
| |
|
 |
