| Description Recently Viewed
A new replacement charger for Dell X9366, 0X9366, 0YD637 laptop models, with power cord included. This Dell charger (19.5v, 6.7a, 131W) can replace any Dell charger requiring 131W or less, as long as the voltage matches. The charger can be used globally, so take it with you anywhere you go.
Over-voltage and over-current protection.Short-circuit protection.Rugged case withstands harshest mobile environments.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
| Dell X9366, 0X9366, 0YD637 |
| Top AC Adapter |
| AC 100-240V, 50/60Hz |
| 19.5v, 6.7a |
| 131 Watts |
| Hollow Cylinder Shape |
| 7.4mm/5.0mm diameter |
| 11.5 mm |
| 1.49 lbs |
| 6.5 in x 2.49 in x 1.48 in |
| 8.31 ft |
| Black |
| |
|
 |
