| Description Recently Viewed
A new replacement charger for CTX PV722E, PV722I LCD models, with power cord included in the package. This CTX charger (12v, 5a, 60W) is compatible with any CTX charger requiring 60W or less, as long as the voltage matches. The charger can be used worldwide, so take it with you when you travel internationally.
Internal safety features against electrical hazards.Short-circuit protection.Rugged case withstands harshest mobile environments.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your LCD.
| CTX PV722E, PV722I |
| Top AC Adapter |
| AC 100-240V, 50/60Hz |
| 12v, 5a |
| 60 Watts |
| Hollow Cylinder Shape |
| 5.5mm/2.5mm diameter |
| 11.2 mm |
| 0.48 lbs |
| 3.22 in x 1.05 in x 0.91 in |
| 7.56 ft |
| Black |
| |
|
 |
