| Description Recently Viewed A new replacement charger for ADI A501, A502, A505 LCD models, with power cable included. This ADI charger (12v, 5a, 60W) is interchangeable with any ADI charger requiring 60W or less, as long as the voltage matches. The charger can be used globally, so take it with you when you travel to another country.
Over-voltage and over-current protection.Short-circuit protection.Durable case sealed for protection against moisture.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your LCD.
ADI A501, A502, A505 |
Top AC Adapter |
AC 100-240V, 50/60Hz |
12v, 5a |
60 Watts |
Single Male Pin |
5.5mm/2.5mm diameter |
10.8 mm |
0.5 lbs |
3.27 in x 1.08 in x 0.84 in |
7.62 ft |
Black |
| |
|
 |