| Description Recently Viewed
A new replacement charger for Acer Ferrari 19v 3.42a, 65 Watt AC Adapter, with power cable included. This Acer Ferrari charger (19v, 3.42a, 65W) functions the same as any Acer charger requiring 65W or less, as long as the voltage matches. The charger can be used worldwide, so take it with you when you travel to another country.
| Acer Ferrari 1000 | Acer Ferrari 1000-5123 | Acer Ferrari 1000-5612 |
| Acer Ferrari 1000WTMi | Acer Ferrari 1003 | Acer Ferrari 1003WTMi |
| Acer Ferrari 1004WTMi | Acer Ferrari 1100 | Acer Ferrari 1200 |
| Acer Ferrari 3200 | Acer Ferrari 3200 Series | Acer Ferrari One 200 |
| Acer Ferrari One 200-1799 | Acer Ferrari One FO200 | Acer Ferrari One FO200-1799 |
|
Over-voltage and over-current protection.Short-circuit protection.Rugged case withstands harshest mobile environments.
The following three condition should be met for you to use this charger safely. You can contact us here if you need further assistance.
1) Output Voltage is within +/- 5% of your old charger's output.
For example, if your old charger provides 19.5V, then you can use a charger that provides 20.5V or 18.5V.
2) Output Current is the same or higher than that of your old charger.
For example, if your original adapter provides 3.42 Amps, then you can use a charger that provides 3.42 Amps, 3.9 Amps or higher.
3) Connector tip must fit securely into your laptop.
| Acer Ferrari 19v 3.42a, 65 Watt AC Adapter |
| Top AC Adapter |
| AC 100-240V, 50/60Hz |
| 19v, 3.42a |
| 65 Watts |
| Single Pin |
| 5.5mm/1.7mm diameter |
| 11.3 mm |
| 0.68 lbs |
| 4.1 in x 1.93 in x 0.91 in |
| 7.91 ft |
| Black |
| |
|
 |
